0086-571-88220653 hzpt@hzpt.com
0 hoʻohana'iaNā
Wae Page

QD sprocket

 

ʻO QD (wikiwiki hiki ke hoʻokaʻawale) he sprocket kahi i hoʻopaʻa ʻia ai ka pahu liʻiliʻi i loko o ka lua liʻiliʻi i hana ʻia i loko o ka sprocket. Ke kau ʻia, hoʻopili ʻia ka bushing ma luna o ke kumu, e hāʻawi ana i kahi paʻa paʻa. ʻO kā mākou QD sprockets e hui a ʻoi aku paha ma mua o ka ANSI standard intolerance, i hana ʻia me ke kila kalapona kiʻekiʻe, a ʻo ka mīkini pololei a me ka ʻenehana e hōʻoia i ka pau ʻana a me ke ʻano kiʻekiʻe.


QD sprocket

ka QD ʻōpala maʻalahi e hoʻouka a wehe. Hoʻokaʻawale ʻia lākou i loko o ka pahu a loaʻa kahi taper e hāʻawi i kahi paʻa maoli ma ke kumu. Hoʻopili ʻia lākou i ke kumu a me ka hub e kōkua i ka wā e hoʻokomo makapō ai.

Hōʻike 'ia nā mea a pau 4 hualoaʻa

Pehea e hoʻouka ai i ka sprocket QD?

  1. E hōʻoia i ka hoʻomaʻemaʻe ʻana o ka ʻili liʻiliʻi o ka lāʻau a me ka loko o ka huahana i hoʻokele ʻia a ʻaʻohe lubricant anti-seize.
  2. e hoʻokomo i ka puʻu i loko o ka sprocket a i ʻole nā ​​ʻāpana ʻē aʻe.
  3. E hoʻokuʻu i ka pōpale i loko o ka puka huki. Hoʻokuʻu wale ʻia ka lāʻau no ka hoʻopaʻa pono ʻana i ke kumu
  4. E hoʻohana i ke kī ma ke kumu e hoʻoheheʻe i ka sprocket i kahi i makemake ʻia ma ke kumu. E hōʻoia i hiki ke loaʻa ke poʻo o ka wili pāpale.
  5. Align the sprocket. Tighten the screws alternately and gradually until they are tightened (see the table below). Do not use an extension on the wrench handle. Do not allow the sprocket to contact the bushing flange. There should be clearance between the bushing flange and sprocket.

HZPT is one of the professional kīwaha Manufacturers and suppliers in China thay you can rely on. Contact now for more information!